
Can you talk more aboutSubmitted by WestfW (not verified) on Sat, 04/04/2009 - 21:24.
Can you talk more about using the laser cutter to cut the etch pattern? Any idea of the limits of the fineness of the line of paint you can burn away and still get a reliable etch? In this example, you're just burning away "bulk" areas; have you tried using vector mode with the "outline" capability of EAGLE? »
Reply |
Sponsors |
Recent Comments
21 hours 57 min ago
1 day 4 hours ago
1 day 7 hours ago
1 day 8 hours ago
1 day 8 hours ago
1 day 8 hours ago
1 day 8 hours ago
1 day 8 hours ago
1 day 8 hours ago
1 day 8 hours ago